Important Info on Brewery Fittings

by | Feb 11, 2014 | Business

Fittings used for brewing beer are multi-purpose equipment. They can also be used for making soft drinks and dairy products as well. For the perfect tasting beer, the brewery fittings must be connected properly. On top of this, they should also be removed and cleaned periodically.

The most important thing that you need to remember is that excellent connections usually demand lots of work. This is why the highest quality fittings are usually available to commercial brewers only. However, home brewers can also enjoy high quality when they decide to walk the extra mile.

Low quality fittings are designed with the o-rings. This makes the task of cleaning much tougher since you’ll be required to remove the o-ring first. Apart from this, they’re made from less sturdy materials which leave them susceptible to leakages and tears. These damages then extend to the inlet of the pump. These low quality brewery fittings will, therefore, cause larger losses in the long run. People who have managed to use the o-rings properly do enjoy years of service from them all the same. The trick is in the way you handle the equipment.

When selecting the fittings, always go for the one that matches the size of your equipment. This is normally indicated by the diameter. For home breweries, the best sizes to use are 1 inch and 1.5 inches. A more compact fitting that is lighter in weight is also suitable but quite expensive. The reason as to why it’s costlier is that it fits easily while facilitating smooth cooking of the beer.

In order to make the connection successfully, you’ll require a clamp and a gasket. The gaskets are readily available in many different materials with the most common for homebrew use being Silicone. This material is heat resistant. Its soft nature will also come in handy when forming it into shape. Another material that can also be used for sealing the connection is Teflon. This is more suitable for connections that will require constant rotation.

All in all, there are several types of materials that are used for making the actual brewery fittings. The most common are stainless steel and brass. Ensure that you select the correct material for your home brewing equipment. Stainless steel is more expensive than brass but generally lasts longer and is less likely to affect the taste of your beer batches.

Get high quality brewery fittings and all types of camlock couplings .  Browse through the site for more amazing products on sale at subsidized prices.

 

Recent Articles

Categories

Archives