Steps Required For A Basic Chimney Repair In Carroll County, MD

by | Mar 16, 2017 | Chimney

If a few bricks that make up a chimney’s surface are damaged, the following steps can be completed to replace them. In addition to performing the repair steps, an individual should have their home’s chimney inspected and cleaned by a professional each year. Magic Mountain Chimney Sweeps or a similar company that offers Chimney Repair in Carroll County MD will address any issues and take measures to ensure that a chimney operates properly when a fireplace is being used.

Materials

* harness

* safety goggles

* extension ladder

* chisel

* hammer

* wire brush

* water hose

* bucket of soapy water

* bricks

* mortar mix

* spoon

* mixing stick

* trowel

Removing Bricks And Cleaning A Chimney’s Exterior

A harness and safety goggles should be worn while making repairs to prevent serious injuries. The tip of a chisel can be pressed against damaged bricks before striking the end of the tool with a hammer. Once bricks have loosened, they can be removed by hand. Hardened mortar can be eliminated with soapy water and a wire brush. A chimney’s exterior needs to be rinsed off with a water hose to remove small mortar fragments and soap.

Installing Bricks And Maintaining A Chimney

Mortar mix and water should be added to a bucket. A large spoon or mixing stick can be used to blend the two components. Mortar mix should be used immediately because it will begin to harden after a few minutes. A trowel can be used to apply a thin, even amount of mortar to the sides of each brick that is being installed in the chimney. Mortar may take a minute or two to bond. Mortar mix will cure after several hours have passed.

A chimney’s appearance can be maintained by rinsing dirty bricks with a water hose. Stains can be eliminated with a product that is designed to be used on brick surfaces. A business that offers a Chimney Repair in Carroll County MD can be hired to install a new chimney or fix an existing structure. Hardened residue needs to be removed from the inside of a chimney occasionally to prevent blockages and avoid serious problems.

You can also follow them on Twitter.

Recent Articles

Categories

Archives