Tips of Fixing Water Heaters in Brandon MS

by | Nov 10, 2014 | Plumbing and Plumbers

One of the most important systems in your home is often the water heater. Without a good working water heater, cleaning clothing, dishes and people can be a lot more difficult and very uncomfortable as well. Because of this, when your Water Heaters in Brandon MS are not working as they should be, you need to call a professional to check on the unit.

Many times if your water heater is not working correct, it will often be due to not producing hot water. This is often the most noticeable issue a homeowner will have with their unit. Water Heaters in Brandon MS stop producing heated water for a number of reasons.

The main reason most water heaters stop working is due to a resource not making it to the unit. For instance, the water may be turned off or the electricity breaker may be flipped. While these are very simple problems, many times you may forget to check these components and this can be the cause of your water heating issues.

There are times when the components that start the water heating process have become faulty. For gas units, the thermocouples, pilot control valve or pilot may need to be replaced. Electrical units have heating elements, which also may need to be replaced.

If these units are all working well, the problem may be the tank has too much sediment in it. A technician can check for this by allowing some water to run out of the drain valve into a bucket. If there is a good deal of grit and other sediment in the bucket, they unit should be flushed.

Flushing a unit is not difficult but it does require time. The electricity and gas must be shut off to the unit. The water for the unit will need to be drained out of it through the drain valve at the bottom of the tank. Once all the water is out, the cold water can be turned back on and allowed to run through the unit and back out the drain. This should be done until the water coming out of the unit is clear.

Once the tank is free of sediment, it can be refilled and all elements switched on. Water should then be able to start heating once again.
Fixing a broken water heater can be difficult for most homeowner. In such cases, calling a professional is a wise choice.

Recent Articles

Categories

Archives