If your air conditioner is running but the air isn’t very cool, it won’t take long before your house starts to get warm. If this situation is happening to you, follow the troubleshooting tips below to get your unit running normally again. If you can’t repair your air conditioner with a simple fix, contact a company that does Air Conditioner Repair in Loughman FL to fix your unit for you.
Check The Thermostat Setting
If your unit isn’t blowing out cold air because you need to adjust your thermostat setting, this is a very simple fix. Look at the display on your thermostat and make sure that the switch is set to the auto position. Do not set the control to the on position, as this causes the blower to constantly run even though it isn’t blowing out any cold air.
Change A Dirty Air Filter
Open the panel on your air conditioning unit that houses the air filter. If the air filter is caked with dust and you can’t see through the filter, change it immediately. A dirt filled air filter keeps the airflow from properly circulating throughout the unit. A dirty filter also makes your unit run harder and this can shorten its lifespan. Regularly check your air filter by examining it once a month to see if it needs to be changed.
Clean Your Outside Unit
Another reason why your air conditioner isn’t cooling your house could be due to a dirty outside unit. When dirt and debris gets down into the components of your unit, the refrigerant can’t properly cool down. When this happens, it can’t cool the inside of your house either. If your unit still isn’t working after performing these troubleshooting tips, contact a company like Watts Air Conditioning that does air conditioner repair to repair your unit for you.
Charles M Watts AC is a family owned company that specializes in air conditioning services for homes and businesses. Their specialties include air conditioning installation, service, repair and maintenance. Visit their website at wattsac.com to schedule a service or to contact them if you have an emergency situation.